Cart is empty
Categories
Best Sellers
Toshiba IK-HR1CD Camera Control Unit for IK-HR1H Camera
The Toshiba IK-HR1CD Camera Control Unit (CCU) is the DVI version of the camera control unit for the Toshiba HR1H High Definition Camera.
If you have lighting conditions which are not consistent, the HR1CD will remember up to 5 scenes for easy recall. The CCU contains local buttons for control (Menu up/down, Data up/down, Display and Page) and can be remotely controlled by RS232.
When combined with the Toshiba IK-HR1H, the HR1CD CCU is switchable between 1080p at 60 fps, 1080i at 30 fps, and 720p at 60 fps. It requires 12V power. Both units are incredibly small. The CCU measures 1.7x1.7x3" (44x44x78mm), which nicely complements the HR1H High Definition Camera.
A full IK-HR1 system consists of an IK-HR1H camera, one of the two CCUs (IK-HR1CS or IK-HR1CD), and an EXC cable. For your convenience you can purchase a fully configured system. Please contact us for help.
| Image Sensor | 1/3" color CMOS sensor (Rolling shutter) |
| Pixels | Horizontal: 1920, Vertical: 1080 (max.) |
| Signal System | 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p |
| Scan Frequencies | Horizontal: 67.43kHz, Vertical: 59.94Hz (when set to 1080/59.94p) Horizontal: 56.25kHz, Vertical: 50Hz (when set to 1080/50p) Horizontal: 33.72kHz, Vertical: 59.94Hz (when set to 1080/59.94i) Horizontal: 28.13kHz, Vertical: 50Hz (when set to 1080/50i) Horizontal: 44.96kHz, Vertical: 59.94Hz (when set to 720/59.94p) Horizontal: 37.50kHz, Vertical: 50Hz (when set to 720/50p) |
| Sensitivity | F4 standard (2000 lx, 3000K) |
| Minimum Illumination | 8 lx standard (50 IRE, F1.4, gain 18 dB, gamma setting ON (setting value 0), 3000 K |
| Signal to Noise Ratio | 54 dB standard (gain 0 dB Y-conversion) |
| Output Signal | DVI-I (Digital RGB, Analog RGB): DVI-I terminal |
| Sync System | Internal |
| Sync Output | H SYNC: 5 V + 0.5 V / -1.0 V (Positive polarity) DVI-I terminal V SYNC: 5 V + 0.5 V / -1.0 V (Positive polarity) DVI-I terminal |
| White Balance | ATW (Automatic tracing white balance), AWB (Automatic white balance), MANUAL (Manual) |
| Gain | MANUAL (Manual), OFF (0 dB) |
| Scene | Scene file: A, B, C, D, E |
| Remote Control | Serial data interface (RS232C) |
| Power Supply | 12V DC +/-10% |
| Power Consumption | Approx. 6.2 W (including the camera head) |
| Operating Temperature | 32 - 104°F (0 - 40°C) |
| Operating Humidity | Less than 90% (non condensing) |
| Options | IK-HR1H: 1/3" full HD color camera head EXC-HR03: Camera cable approx. 9.8' (3m) EXC-HR05: Camera cable approx. 16.4' (5m) EXC-HR10: Camera cable approx. 32.8' (10m) |
| Dimensions (WxHxD) | 1.7 x 1.7 x 3.1" (44 x 44 x 77.4mm) |
| Weight | 0.3 lbs (138g) |